------=_NextPart_000_0538_01C5CB7A.8D3A3D20 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable See my article "Strange Sounds from the Belfry" a few Christmasses ago. Har= rington's were the only firm regularly to produce tubular chimes for church= towers, c1885 - c1925. However, G&J, never ones to turn down a job, freque= ntly overhauled sets at as time when othjer fouinders/bellhangers wouldn't,= and in the case of St George's, Ramsgate, cast in 1917 a flat 7th for the = ten which had been supplied by HL&Co in 1888. It sounds just as bad as the = rest of them - I wonder if they bought it from Harrington's. It looks the s= ame as the rest and has no lettering on it.=20=20 The testimonials which they published remind one of the sort of thing which= Vickers published for their steel bells. Either those who wrote them were = easily pleased, or just wished to get their names in print; or else the pas= sage of time and the condition of the equipment and the bells themselves ha= s lent itself in some cases to a monstrosity of tone which surely was not t= he case when they were supplied. I have seen and heard some restored sets -= the now removed octave at Sandwich and the eight at Garsdon, Wilts, come s= traight to mind; and they sounded reasonable enough. Clearly, domestic clock chimes were made after Harringtons' demise; perhaps= the question could have been asked of the horologists at the road show. I = gather that some small sets were amplified in towers and broadcast through = loudspeakers. Is not the Royal Liver Building supposed to be so equipped? DLC=20=20=20=20=20 ----- Original Message -----=20 From: Jim Phillips=20 To: Bell Historians=20 Sent: Friday, October 07, 2005 12:18 PM Subject: [Bell Historians] Tubular chimes. GAD wrote "Tuning is very simple, just saws some tube off the end!" I feel it is not so simple. I have two sets of tuned wind chimes by Woodstock. The Gregorian chime (soprano) consists of 8 tubes and the Kyoto consisting of 5 much larger tubes. Some of the Kyoto tubes have chamfered ends and most of the ends of the tubes appear to have been on the lathe to get the right pitch. To get an organ pipe to sound the right note you just do not saw off the end. It requires 'tweaking'. I have never heard tower tubular bells but I have heard hemispherical bells chimed - St Mark, Victoria Park chimed by the late Ernie Rowe and they sounded very realistic. SPONSORED LINKS Bells are ringing Craft hobby Hobby and craft supply = =20 Ringing Bell=20=20 ---------------------------------------------------------------------------= --- YAHOO! GROUPS LINKS=20 a.. Visit your group "bellhistorians" on the web. =20=20=20=20=20=20 b.. To unsubscribe from this group, send an email to: bellhistorians-unsubscribe@yahoogroups.com =20=20=20=20=20=20 c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Servic= e.=20 ---------------------------------------------------------------------------= --- ------=_NextPart_000_0538_01C5CB7A.8D3A3D20 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
----- Original Message -----Fro= m:=20 Jim PhillipsTo: Bell HistoriansSent: Friday, October 07, 2005 12:= 18=20 PMSubject: [Bell Historians] Tubular= =20 chimes.
GAD wrote
"Tuning is very simple, just saws som= e=20 tube off the
end!"
I feel it is not so simple. I have two= sets=20 of tuned
wind chimes by Woodstock. The Gregorian chime
(sopra= no)=20 consists of 8 tubes and the Kyoto consisting
of 5 much larger tubes.&n= bsp;=20 Some of the Kyoto tubes have
chamfered ends and most of the ends of th= e=20 tubes
appear to have been on the lathe to get the right
pitch. = ; To=20 get an organ pipe to sound the right note
you just do not saw off the= =20 end. It requires
'tweaking'. I have never heard tower tubu= lar=20 bells
but I have heard hemispherical bells chimed - St Mark,
Victor= ia=20 Park chimed by the late Ernie Rowe and they
sounded very=20 realistic.
------=_NextPart_000_0538_01C5CB7A.8D3A3D20--