<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=UTF-8" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
Hello Everyone,<br>
<br>
We need help from an expert concerning the manufacture of a new slider.<br>
<br>
It is 40-3/4 in. long, tip to tip. It is 2-1/4 in. thick.<br>
<br>
At the pivot end it has 3-1/2 in. radius and at the sliding end it is
2-1/2 in wide and is squared. In other words it tapers from 3-1/2 in.
to 2-1/2 in.<br>
<br>
The pivot pin is 5/8 in. in diameter and the centre line of the hole is
2-1/2 in. in from the end.<br>
<br>
When the pivot end is flat, the sliding end is 6-1/4 in. higher. The
length of the 'flat' at the pivot end is about 19 in. At the sliding
end, the 'flat' is 5 in. Between the two curved parts, there is also
a flat section some 14 in. long.<br>
<br>
An estimate of price and delivery time would be appreciated. What
would be really wonderful is if I could bring it back to Canada at the
end of the month..<br>
<br>
Best wishes<br>
<br>
Alan Ellis<br>
Holy Rosary Cathedral, Vancouver.<br>
<br>
<blockquote cite="mid955955.99848.qm@X331-L1Z_OnEaT1oR1OqG3XvbDJxAW5xL1o8tiscUY7HP3eRjc9EO1FWkcTxY4P6Pcf-KOahteUCCVQpeQbSiEHKYXQa6_sObi-ANncP8sw4b9T9YCnRk_Mk.yahoo.invalid"
type="cite"><!-- end group email -->
</blockquote>
</body>
</html>