[Bell Historians] First use of roller bearings?

[MATTHEW HIGBY]

I’ve used self aligning (spherical roller) bearings in some cases too… you can use smaller housings that way, and the ratings are significantly higher than using ball races. 
Matthew

Sent from my iPhone

> On 26 Feb 2022, at 08:56, Nigel Taylor <nigelsdtaylor at outlook.com> wrote:
> 
> 
> I am not sure the difference is clear. I have often seen references to bells 'hung on roller bearings' when clearly they are not. Bob Parker used rollers, and Whitechapel used them sometimes for large, swinging bells. 
> 
> Nigel Taylor 
> 
> Get Outlook for Android
> From: Bell-historians <bell-historians-bounces at lists.ringingworld.co.uk> on behalf of Andrew Higson via Bell-historians <bell-historians at lists.ringingworld.co.uk>
> Sent: Friday, February 25, 2022 7:23:25 PM
> To: Bell Historians Mailing List <bell-historians at lists.ringingworld.co.uk>
> Cc: Andrew Higson <andrewhigson at ymail.com>
> Subject: Re: [Bell Historians] First use of roller bearings?
>  
> Just wondering if the distinction between roller bearing and ball bearings is clear. Roller bearings seems to be common parlance for anything that isn’t a plain bearing. 
> 
> A
> 
> 
> Sent from Yahoo Mail for iPhone
> 
> On Friday, February 25, 2022, 19:10, georgebellringer at gmail.com wrote:
> 
> Jennings in his book The development of British bell fittings deals with various forms of rollers in bearings, eg p.65.   So by the 1890’s they were well known.
> 
>  
> 
> G
> 
>  
> 
> From: Bell-historians [mailto:bell-historians-bounces at lists.ringingworld.co.uk] On Behalf Of Carl S Zimmerman
> Sent: 25 February 2022 17:48
> To: Bell Historians Mailing List
> Subject: [Bell Historians] First use of roller bearings?
> 
>  
> 
> An 1896 newspaper article about the installation of a G&J chime with swinging tenor bell (https://www.newspapers.com/clip/96404646) makes the claim that this is "the first time the roller principle has been introduced into bell hanging."  Is that claim correct?  If not, when and where were roller bearings first used?
> 
>  
> 
> Carl Scott Zimmerman, Campanologist 
> Saint Louis, Missouri, USA -
>  - 19th c. home of at least 37 bell founders or resellers 
> Tel. +1(314)821-8437 
> Webmaster for www.TowerBells.org
>  * Avocation: tower bells
>  * Recreation: handbells
> 
>  * Mission: church bells
> 
> Webmaster for www.TSCChapter134.org
> 
> Treasurer, World Carillon Federation
> 
> _______________________________________________
> Bell-historians mailing list
> Bell-historians at lists.ringingworld.co.uk
> https://lists.ringingworld.co.uk/listinfo/bell-historians
> _______________________________________________
> Bell-historians mailing list
> Bell-historians at lists.ringingworld.co.uk
> https://lists.ringingworld.co.uk/listinfo/bell-historians
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ringingworld.co.uk/pipermail/bell-historians/attachments/20220226/708ad44d/attachment-0001.htm>