[Bell Historians] Re: St Barnabas, Pimlico

stephen_dutfield stephen.dutfield at oyBUdwsdGZeS4TNd9xc2RGBz_74xAaZr0EQ6UTe7UVfKqLmgja2_hpaEqdDoovBl-6qGyWF33gWg6omcuFGATqDtpkGC8z8.yahoo.invalid
Sat Dec 19 21:16:00 GMT 2009


Do you think that the rarity of 'latchet' stays like this might get E.H. hot under the collar in the event of a re-hang? I'm sure that the safety issue would over-ride in this case anyway, but I wonder whether they'd want parts of the current installation retained in the tower for posterity. Are there many others like this left? East Bergholt perhaps....

S



--- In bellhistorians at yahoogroups.com, "Alan Taylor" <alantaylor at ...> wrote:
>
> I will attempt a description of what passes for stays and sliders. 
> 
>  
> 
> A metal pin extends out of one of the sides of the wooden headstock. This
> then contacts a metal device attached to the frame. This might be called a
> ratchet I believe. There is probably someone on this list who will know
> about this system.
> 
>  
> 
> Alan
> 
>  
> 
>   _____  
> 
> From: bellhistorians at yahoogroups.com [mailto:bellhistorians at JwhtQpio5ALtkZi4B8GBuuiXZRvSMaQC6tCoVIn96ApAw98wCy1jJjySuQl9ughZcCLA8dvHyrP5GSfNmkcFQEmtBhuZJE8.yahoo.invalidom]
> On Behalf Of stephen_dutfield
> Sent: 19 December 2009 14:32
> To: bellhistorians at yahoogroups.com
> Subject: [Bell Historians] Re: St Barnabas, Pimlico
> 
>  
> 
>   
> 
> 
> 
> Hi Alan,
> 
> Thanks for flagging up the YouTube videos, which are well worth a watch.
> Forgive my ignorance, but can you describe the mechanism which the Pimlico
> bells have for setting? Dove lists them as mid-19th century bells so,
> assuming the frame and fittings are contemporary, was this an experimental
> installation, or was there another common method of setting - apart from
> stay and slider - still in use at that time?
> 
> S
> 
> --- In bellhistorians@ <mailto:bellhistorians%40yahoogroups.com>
> yahoogroups.com, "Alan Taylor" <alantaylor@> wrote:
> >
> > The bells are by no means easy to ring and also cursed by not having the
> usual stays and sliders. The mechanisms do not have a breaking point like a
> conventional stay and slider system. This means potential very serious
> damage if a bell is hit hard against the present mechanism, which means in
> reality that the bells can only be rung by ringers of experience and good
> handling skills. Our long term plans are to get the bells re-hung.
>



           



More information about the Bell-historians mailing list