[Bell Historians] Re: St Barnabas, Pimlico

[Alan Taylor]

We have the DAC bell advisor on side. And I think I would trust him to deal
with EH. We would re-hang the bells in the present frame which is in very
good nick.

Alan

________________________________________
From: bellhistorians at yahoogroups.com [mailto:bellhistorians at yahoogroups.com]
On Behalf Of stephen_dutfield
Sent: 19 December 2009 21:16
To: bellhistorians at yahoogroups.com
Subject: [Bell Historians] Re: St Barnabas, Pimlico

  
Do you think that the rarity of 'latchet' stays like this might get E.H. hot
under the collar in the event of a re-hang? I'm sure that the safety issue
would over-ride in this case anyway, but I wonder whether they'd want parts
of the current installation retained in the tower for posterity. Are there
many others like this left? East Bergholt perhaps....

S

--- In bellhistorians at yahoogroups.com, "Alan Taylor" <alantaylor at ...> wrote:
>
> I will attempt a description of what passes for stays and sliders. 
> 
> 
> 
> A metal pin extends out of one of the sides of the wooden headstock. This
> then contacts a metal device attached to the frame. This might be called a
> ratchet I believe. There is probably someone on this list who will know
> about this system.
> 
> 
> 
> Alan
> 
> 
> 
> _____ 
> 
> From: bellhistorians at yahoogroups.com
[mailto:bellhistorians at yahoogroups.com]
> On Behalf Of stephen_dutfield
> Sent: 19 December 2009 14:32
> To: bellhistorians at yahoogroups.com
> Subject: [Bell Historians] Re: St Barnabas, Pimlico
> 
> 
> 
> 
> 
> 
> 
> Hi Alan,
> 
> Thanks for flagging up the YouTube videos, which are well worth a watch.
> Forgive my ignorance, but can you describe the mechanism which the Pimlico
> bells have for setting? Dove lists them as mid-19th century bells so,
> assuming the frame and fittings are contemporary, was this an experimental
> installation, or was there another common method of setting - apart from
> stay and slider - still in use at that time?
> 
> S
> 
> --- In bellhistorians@ <mailto:bellhistorians%40yahoogroups.com>
> yahoogroups.com, "Alan Taylor" <alantaylor@> wrote:
> >
> > The bells are by no means easy to ring and also cursed by not having the
> usual stays and sliders. The mechanisms do not have a breaking point like
a
> conventional stay and slider system. This means potential very serious
> damage if a bell is hit hard against the present mechanism, which means in
> reality that the bells can only be rung by ringers of experience and good
> handling skills. Our long term plans are to get the bells re-hung.
>