[Bell Historians] Slider Manufacturers

[Ian Johnson]

Alan if you are coming north to God's own county we can supply any curve and drop within a couple of days for about £50
Yours Ian





========================================
Message Received: May 10 2010, 07:28 AM
From: "Alan Ellis" 
To: bellhistorians at yahoogroups.com
Cc: 
Subject: [Bell Historians] Slider Manufacturers


Hello Everyone,

We need help from an expert concerning the manufacture of a new slider.

It is 40-3/4 in. long, tip to tip. It is 2-1/4 in. thick.

At the pivot end it has 3-1/2 in. radius and at the sliding end it is 2-1/2 in wide and is squared. In other words it tapers from 3-1/2 in. to 2-1/2 in.

The pivot pin is 5/8 in. in diameter and the centre line of the hole is 2-1/2 in. in from the end.

When the pivot end is flat, the sliding end is 6-1/4 in. higher. The length of the 'flat' at the pivot end is about 19 in. At the sliding end, the 'flat' is 5 in. Between the two curved parts, there is also a flat section some 14 in. long.

An estimate of price and delivery time would be appreciated. What would be really wonderful is if I could bring it back to Canada at the end of the month..

Best wishes

Alan Ellis
Holy Rosary Cathedral, Vancouver.


           
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ringingworld.co.uk/pipermail/bell-historians/attachments/20100510/b32122e6/attachment.html>