Slider Manufacturers

[Alan Ellis]

Hello Everyone,

We need help from an expert concerning the manufacture of a new slider.

It is  40-3/4 in. long, tip to tip.  It is 2-1/4 in. thick.

At the pivot end it has 3-1/2 in. radius and at the sliding end it is 
2-1/2 in wide and is squared.   In other words it tapers from 3-1/2 in. 
to 2-1/2 in.

The pivot pin is 5/8 in. in diameter and the centre line of the hole is 
2-1/2 in. in from the end.

When the pivot end is flat, the sliding end is 6-1/4 in. higher.   The 
length of the 'flat' at the pivot end is about 19 in.   At the sliding 
end, the 'flat' is 5 in.   Between the two curved parts, there is also a 
flat section some 14 in. long.

An estimate of price and delivery time would be appreciated.  What would 
be really wonderful is if I could bring it back to Canada at the end of 
the month..

Best wishes

Alan Ellis
Holy Rosary Cathedral, Vancouver.

           
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ringingworld.co.uk/pipermail/bell-historians/attachments/20100509/749224bd/attachment.html>